GM E37 ECM Programming Harness

for 2007-2013 2.0L 2.2L 2.4L 3.5L 3.9L 4.3L

Part #: 100-01058

Dimensions

  • Weight: 8 Pounds

This Engine Control Module (ECM) programming harness is to be used with any of our BenchForce™ PowerBlock switch assemblies to reprogram E37 ECMs outside of the vehicle.

OBD2 Switch Assembly Pass-Through Harness
ECU harnesses connect to the OBD2 switch assembly through a short pass-through harness. This E37 ECM programming harness requires a Pass-Through Harness. The BenchForce™ PowerBlock uses EFI# 100-01072. Pass-Through Harness sold separately.

E37 ECMs Contain Internal CAN Termination
This simply means that an external CAN termination resistor is not required and that the E37 ECM can be programmed on the benchtop with a direct connection to the OBD2 Switch Assembly using a Pass-Through Harness. The BenchForce™ PowerBlock uses EFI# 100-01072.

CLICK TO ENLARGE IMAGE IN NEW WINDOW

 

E37 ECM - SUPPORTED VEHICLES *
YEARMAKEMODELENGINE
09-11BuickLucerne3.9L
09-11BuickRegal (China)2.0L
11ChevroletCaptiva (China)2.4L
08ChevroletCobalt Sport2.2L
07-10ChevroletCobalt2.2L
07-13ChevroletExpress4.3L
07-11ChevroletHHR2.2L, 2.4L
10-11ChevroletImpala3.5L, 3.9L
08-12ChevroletMalibu2.4L
10ChevroletMalibu3.5L
07-08ChevroletMalibu2.2L
07-13ChevroletSilverado4.3L
07-13GMCSavana4.3L
07-13GMCSierra4.3L
07-10PontiacG52.2L
08PontiacG5 GT2.4L
08-10PontiacG62.4L
08-10PontiacSolstice2.4L
08-09SaturnAura2.4L
08-09SaturnSky2.4L
08-09SaturnVue2.4L
* While this E37 ECM programming harness is compatible with all E37 ECM equipped vehicles listed above, there may be many E37 ECM service numbers. The ECM service number should match the vehicle service calibration to avoid potential damage to the ECM.

Caution should be taken to ensure ECM/program compatibility before service programming.